How to use GoDEX label printer with external battery 24V

You will need aditional three longer screws to connect printer with battery holder

Battery need to buy separatly.

We advise battery model: XTPower®-XT-20000QC3-AO-PA-Powerbank-inkl-Netzteil

Link: LINK

When custome buy it by default it is set 12 v and customer need to setup output to 24V.

Here are steps how to do this:

1. Press and hold the ON/OFF button for about 3 seconds until the voltage digits on the display start blinking.
2. Press the same button repeatedly—each press cycles through the available DC output voltages:
3. Stop pressing once “24 V” is flashing. After about 3 seconds of inactivity, the voltage setting is locked in.
4. Briefly press the button to activate the output—you'll then see the selected voltage and output power displayed.